Toshiba AT200 Graphics Tablet User Manual


 
You can charge the tablet by connecting the power cable to a USB port on
a computer. TOSHIBA recommends charging when the tablet goes into
sleep mode.
Turning on the power
This section describes how to power up your tablet.
Press and hold Power button to turn on the tablet. The tablet will vibrate to
indicate the status.
Figure 3-5 Turn on the tablet
Initial Setup
The Setup Screen will be the first screen displayed when you turn on the
power. Setup your tablet according to the following steps:
1. Choose your preferred language and tap Start to continue.
2. Connect to a wireless network via Wi-Fi.
You can choose to skip and turn Wi-Fi on later in Settings screen.
3.
Choose whether to use Google Location Service™ and tap Next to
continue.
4. Set date and time or use network-provided time and tap Next to
continue.
5. Register or sign in with a Google™ account. You can also skip this
step by tapping Skip.
The last step will be automatically skipped if you choose to skip Wi-Fi
connection.
Turning off the power
If you are not going to use your tablet for a long time, shut it down. You can
also turn the LCD off in order to extend battery life.
Shut down the tablet
When you shut down the tablet, no data will be saved. The tablet will boot
to the operating system's main screen the next time it is turned on.
TOSHIBA AT200
User's Manual 3-9