Filter
Top Products
2. MAJOUR UNIT REPLACEMENT EO18-33021
2.3. REPLACING THE PS UNIT
2- 10
10) Push both sides of the Power Switch with something like pliers and remove it from the frame of the PS
Unit. Disconnect the Inlet Ass’y from CN1 on the PS Unit.
11) Remove the SMW-3x4 screw to detach the Fan Motor Attachment Plate from the PS Unit.
12) After replacing the individual part with a new one as necessary, reassemble in the reverse order of steps
8) to 11).
SMW-3x4 Screw
Fan Motor Attachment Plate
CN1
Inlet Ass’y
Inlet Ass’y
(Connector)
Power Switch