Filter
Top Products
2. MAJOUR UNIT REPLACEMENT EO18-33021
2.5. REPLACING THE MEDIA SENSOR
2- 12
2.5 REPLACING THE MEDIA SENSOR
2.5.1 Replacing the Sensor PCB (TR)
1) Push down the Head Release Lever R to open the Print Head Block. (Refer to Section 2.4)
2) Remove the Sensor Holder from the Sensor Holder Arm.
3) Remove the Sensor Cover Sheet from the Sensor Holder.
4) Release the Sensor Holder while spreading the tabs of the Sensor Holder. Be careful not to break the
tabs when spreading them.
Sensor Holder Arm
Sensor Holder
Sensor Holder Sensor Cover Sheet
Sensor Holder
Sensor Cover Sheet
Sensor Holder
Fixed Portion
Tab