Filter
Top Products
2. MAJOUR UNIT REPLACEMENT EO18-33021
2.5. REPLACING THE MEDIA SENSOR
2- 16
7) Detach the Printer Unit from the Bottom Cover.
8) Disconnect the harness from the Sensor PCB (LED) which is attached to the bottom of the Printer Unit.
Then remove the Rivet to detach the Sensor PCB (LED) from the Printer Unit.
9) Replace the Sensor PCB (LED) with a new one, and then reassemble in the reverse order of removal.
Bottom Cover
Printer Unit
Hook
Rivet Printer Unit
Harness
Sensor PCB (LED)