Filter
Top Products
2. MAJOUR UNIT REPLACEMENT EO18-33021
2.2. REPLACING THE MOTOR
2- 5
2.2 REPLACING THE MOTOR
2.2.1 Ribbon Motor
1) Remove the CPU PC Board Ass’y. (Refer to Section 2-1)
2) Remove the two PT-3x10 screws and harnesses to detach the Ribbon Motor Attaching Plate.
3) Remove the four SMW-2.6x6 screws to detach the two Ribbon Motors from the Ribbon Motor Attaching
Plate.
4) Replace the Ribbon Motors with new ones, and then reassemble in the reverse order of removal.
Harness
PT-3x10 Screw
PT-3x10 Screw Harness
Ribbon Motor
A
ttaching Plate
Ribbon Motor
A
ttaching Plate
Ribbon Motor
FLOIL G-488
SMW-2.6x6 Screw
SMW-2.6x6 Screw
Ribbon Motor
Ribbon Motor Attaching Plate