Filter
Top Products
6-32
EM18-33010A
6. DIAG. TEST OPERATION
6.3.12 Stacker Selection
NOTE: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables
a fast forward.
2. A changed Stacker selection is stored in memory by pressing the [PAUSE] key.
■ [FEED] key:
ON: Stacker is used.
■ [RESTART] key:
OFF: Stacker is not used.
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
Press the [PAUSE] key.
Press the [PAUSE] key fourteen times.
<
1 DIAGNOSTIC V1.OA
>
<
2 PARAMETER SET
>
T
ST CKER SYS EM OFFA
Press the [FEED] key or
[RESTART] key to select
ON or OFF to the stacker.
Press the [FEED] key
and [RESTART] key at
the same time.
Press the [PAUSE] key.
Continued on Section
6.3.13 Threshold Manual
Fine Adjustment for the
Black Mark Sensor.
SVO8A1002 : Jan. 19, '98
6.3 PARAMETER SETTING MODE