Filter
Top Products
6-38
EM18-33010A
6. DIAG. TEST OPERATION
(Revision Date: Aug. 5 ‘99)
6.3 PARAMETER SETTING MODE
6.3.16 Euro Font Code Selection
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables
a fast forward.
2. A changed Euro font code is stored in memory by pressing the [PAUSE] key.
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
Press the [PAUSE] key.
Press the [PAUSE] key 18 times.
<
1 DIAGNOSTIC V1.OA
>
<
2 PARAMETER SET
>
EU O CODE BOHR
Select the Euro font code
with the [FEED] key or
[RESTART] key.
Press the [PAUSE] key.
Continued on Section
6.3.17 Transmission
Control Mode Selection
Press the [PAUSE] key
and [RESTART] key at
the same time.
•20H
[RESTART] key ↑↓ [FEED] key
•FFH