Filter
Top Products
2. PRINTER SETUP
ENGLISH VERSION EO1-33048
2.3 Loading the Media
E2- 4
2.3 Loading the Media
(Cont.)
5. Put the Media Holder (Left) onto the Media Shaft. Push the Media
Holder (Left) and the Media Holder (Right) against the media until the
media is held firmly in place. This will automatically centre the
media.
6. Fold the Release Lever to lock the Media Holder (Left).
7. Place the Media Holder Ass’y into the printer.
8. Slightly push the Upper Sensor Lever inside (c), and open the Upper
Sensor Ass’y (d).
NOTE:
B
e careful of the orientation of the
Media Holder Ass’y and the media.
Release Leve
r
Media Holder (Right)
Media Holder (Left)
Media Holder (Left)
Upper Sensor
Ass’y
Upper Sensor Lever
CAUTION!
Make sure that the Upper
Sensor Ass’y is closed when
p
lacing the Media Holder Ass’y
into the printer. If the Upper
Sensor Ass’y is opened, it may
be damaged.
Media Holder Ass’y
Upper Sensor
Ass’y
c
d