Filter
Top Products
2. PRINTER SETUP
ENGLISH VERSION EO1-33048
2.7 Setting an Operating Environment
E2-19
2.7.2 Parameter Setting
(Cont.)
Serial (RS-232C) Interface
<Reference>
Properties screen of Serial (COM) port
under Windows98
The following parameters of the RS-232C interface can be set:
Baud rate
Data length
Stop bit
Parity
Flow control
Set these in accordance with the setting of your host computer.
(1) Baud Rate
This parameter is to choose a communication speed of the RS-232C
interface.
As “9600 bps” has been chosen as default, change it in accordance with
your PC.
After making a choice, press the [PAUSE] key.
NOTES:
1. Choose a desired baud rate by
using the
[RESTART] or
[FEED] key.
2. Be careful if the printer is
turned off without pressing the
[PAUSE] key, the selected
value does not become effective.
<2>PARAMETER SET
SPEED 9600bps
[RESTART]
[FEED]
SPEED 19200 bps
SPEED 9600 bps
SPEED 4800 bps
SPEED 2400 bps
SPEED 115200 bps
SPEED 38400 bps