Filter
Top Products
Chapter 3 Printing
49
9
Click More precise adjustment is necessary. Click OK, and
test printing starts automatically. Repeat Step 4 to 6 until the
yellow bars in X and Y are aligned close enough to black.
Note:
If precise adjustment cannot be made
any more, this option will be grayed
out.
(Color 0 - Yellow Sample after Calibration)
10
Click Print this set of figures again. Testing will start
automatically.
This section describes spot color printing. In Spot Color Setup, up to
four colors can be selected. Generally, spot color printing is used for
printing applications that require exact color matching. Spot color
printing has the following advantages:
• Special colors available.
• Cost efficiency (since four ribbons are not required to produce
one color).
• Colors and text printing are sharper.
1
Click Spot Color Setup on the Graphics property page to open
Color Setup.
X1 Y1
X2 Y2
X3 Y3
X4 Y4
X5 Y5
X6 Y6
X7 Y7
X8 Y8
X9 Y9
3.4.5 Spot Color Setup
2
Click Color Model down arrow, and select the color method.
• Click 4-Color Process (CMY) for producing the best possible
graphics. This is selected as the default color model.
• Click 4-Color Process (CMYK) for producing an image
containing solid blacks and/or text.
• Click 2-4 Spot Colors. Up to four print table colors can be
selected.
Note:
Click Help for a detailed explanation
of the differences between Process
and Spot.
Yellow
Black
Black
Yellow
3.4.4 Color Registration
(Cont.)