Filter
Top Products
3 CONNECTING TO A COMPUTER
24 Connecting to the USB Port
Connecting to the USB Port
This section describes how to connect this equipment to a computer using a USB 2.0 compatible
cable.
This USB cable is not included in the accessories. Obtain one compatible with your com-
puter.
When the Network Printer Kit is installed, the USB terminal originally installed on this equip-
ment will be disabled. The USB connector described in this step is the connector of the Net-
work Printer Kit.
1
After the Network Printer Kit has been installed, insert the USB
cable into the deep end of the USB interface connector on the rear
side of this equipment.
2
Connect the other end of the USB cable to the USB port of your
computer.
3
Turn ON the power of this equipment and the power of the com-
puter.