Filter
Top Products
Chapter 10. Plugins 126
Mode Settings Opens a menu from which you can adjust settings pertaining to the
current clock mode (analog, digital, binary).
General Settings Reset Settings Reset all settings to their default values.
Save Settings Save all settings to disk.
Show Counter Toggle Counter display.
Save Choose whether to disable automatic saving, saving to disk on exit, or saving
to disk every settings change.
Backlight Choose whether to disable the backlight, use the user’s timeout setting,
or keep the backlight on.
Idle Poweroff Toggle Idle Poweroff.
Note: This setting is not saved to disk.
b
Help Opens a brief help screen with key mappings and functionality.
Credits Displays a credits roll.
Analog mode
Small, round, analog clock is displayed in the middle of the LCD. Time readout, if
enabled, is displayed at the upper left. If Time readout is in 12-hour (“12h”) mode, AM
or PM will be displayed at the upper right. The Date readout, if enabled, is displayed
at the lower left. The Counter, if enabled, is displayed at the lower right. The second
hand, if enabled, is displayed along with the hour and minute hands. Digit display, if
enabled, places “12”, “3”, “6”, and “9” around the face of the clock in their respective
positions.
Digital mode
An imitation of an LCD, this mode shows a Clock comprised of digital “segments”. The
Date readout, if enabled, is displayed at the bottom, center. The Second readout, if in
“Text” mode, is displayed at the top, center; if in “Bar” mode, is displayed as a progress
bar at the top of the LCD; if in “Invert” mode, will invert the LCD left-to-right as the
seconds pass (a fully-inverted LCD means the entire minute has passed). The Counter,
if displayed, is shown at the upper left. The Blinking Colon, if enabled, blinks the colon
once every second. 12-hour mode, if enabled, will display the time in a 12-hour format.
LCD mode
Based on the Digital Mode, the LCD mode is another imitation of an LCD. The settings
available in this mode are exactly the same as Digital Mode, but they are independent
of Digital Mode. For example, you can have the Date Readout enabled in Digital Mode
and disabled in LCD Mode.
The Rockbox manual Toshiba Gigabeat F Series