Filter
Top Products
5. PROGRAMMING OPERATIONS
EO1-11138
5-57
Printer Table Setting Contents
Address No. Description of Programming Contents
1, 3 Destination of Output
Destination of data output is as follows.
1: Receipt 4: RKP 3
2: RKP 1 5: RKP 4
3: RKP 2 6: Journal
Terminal ID/Port No.
Enter a 2-digit terminal ID No. and a 1-digit port No.
NOTE: If your system is the standalone system, enter only a 1-digit port No.
2, 4 Destination of Output
Destination of data output is as follows.
1: Receipt 4: RKP 3
2: RKP 1 5: RKP 4
3: RKP 2 6: Journal
Connection Status
Connection status is as follows.
0: OFF (Disconnection) 1: ON (Connection)
NOTE: When a terminal ID/port No. is entered, a connection status will be automatically set
to “ON” (Connection).
5 Port No.
Port No. is as follows.
1: Port 1
2: Port 2
3: Port 3 (Hardware Option)
Printer
A printer connectable is as follows.
1: TM-300 (Receipt, RKP 1 to 4, Journal) 3: BRST-10 (Receipt)
2: TM-T88 (Receipt, RKP 1 to 4) 0: None
6 Port No.
Port No. is as follows.
1: Port 1
2: Port 2
3: Port 3 (Hardware Option)
Transmission Speed
0: 19200 bps 1: 9600 bps
5.4 How to Access a Program Item
ex.) To set the following to a printer table 1.
Printer Table 1 Address 1 (Destination of Output): 1 (Receipt)/1 (Port 1)
2 (RKP 1)/2 (Port 2)
6 (Journal)/2 (Port 2)
Address 2 (Connection Status): 1: ON for all the destinations
Address 5 (Printer): 1 (Port 1) for 3 (BRST-10)
2 (Port 2) for 1 (TM-300)
Mode Lock: SET
Enter 71, depress [X].
1 [NS] 1 [ST] 1 [#] (2 [ST]) 2 [#] 6 [ST] 2 [#] 2 [NS] 1 [ST] 1 [#] (2 [ST]) 1 [#] 6 [ST] 1 [#] 5 [NS]
1 [ST] 3 [#] (2 [ST]) 1 [#] [AT/TL]