G8000 Series Installation and Operation Manual (380 V)
The Toshiba products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, ofce equipment, measuring equipment, industrial robotics, domestic
appliances, etc.). These Toshiba products are neither intended nor warranted for usage in equipment
that requires extraordinarily high quality and/or reliability; nor are they intended to be used in equipment
that, if a malfunction or failure occurs, may result in loss of human life or bodily injury (collectively referred
to as “Unintended Usage”). Unintended Usage includes atomic energy control instruments, airplane
or spaceship instruments, transportation instruments, trafc signal instruments, combustion control
instruments, medical operating room or life support equipment, all types of safety devices, etc. Unintended
Usage of Toshiba products listed in this document shall be made at the customer’s own risk.
NOTICE
PLEASE INFORM TOSHIBA INTERNATIONAL CORPORATION OR AUTHORIZED
REPRESENTATIVE IN CASE OF INCONSISTENCIES, OMISSIONS, OR QUESTIONS.
The instructions contained in this manual are not intended to cover all of the details or variations in
equipment, nor to provide for every possible contingency concerning installation, operation, or maintenance.
Should further information be required or if problems arise which are not covered sufciently contact your
Toshiba sales ofce.
The contents of this instruction manual shall not become a part of or modify any prior or existing
agreement, commitment, or relationship. The sales contract contains the entire obligation of Toshiba
International Corporation’s UPS Division. The warranty contained in the contract between the parties
is the sole warranty of Toshiba International Corporation’s UPS Division and any statements contained
herein DO NOT create new warranties or modify the existing warranty.
Any electrical or mechanical modications to this equipment without prior written consent of Toshiba
International Corporation will void all warranties and may void the UL/CUL listing. Unauthorized
modications can also result in personal injury, death, or destruction of the equipment.
QUALIFIED PERSONNEL ONLY
Qualied Personnel is one that has the skills and knowledge relating to the construction,
installation, operation, and maintenance of the electrical equipment and has received safety
training on the hazards involved (Refer to the latest edition of NFPA 70E for additional safety
requirements).