Filter
Top Products
User’s Manual 5-3
The Keyboard
Press Fn + F11 to access the integrated keypad. When activated, the keys
with gray markings on the bottom edge become numeric keypad keys.
Refer to the Keypad overlay section in this chapter for more information on
how to operate these keys. The power on default for both settings is off.
Press Fn + F12 to lock the cursor on a specific line. The power on default is
off.
Hot keys
Hot keys let you enable or disable certain features of the computers.
Sound mute: Pressing Fn + Esc in a Windows
®
environment turns sound
on or off. When you press these hot keys, the current setting will change
and be displayed as an icon.
Instant security: Press Fn + F1 to blank the screen to prevent others from
accessing your data. To restore the screen and original settings, press any
key or press the Touch Pad. If a screensaver password is registered, a
dialog box will appear. Enter the screensaver password and click OK. If no
password is set, the screen will be restored when you press any key or
press the Touch Pad.
Power save mode: Press Fn + F2 to change the power save mode. If you
press Fn + F2 in a Windows environment, the Power Save Mode is
displayed in a dialog box. Continue holding down Fn and press F2 again to
change the setting. You can also change this setting through the Profile
item in TOSHIBA Power Saver.
Standby: When you press Fn + F3, the computer enters Standby Mode. To
avoid entering Standby Mode unexpectedly, a dialog box appears for
verification. However, if you select the check box, it will not appear in the
future.