Filter
Top Products
9-16 User’s Manual
L300/L300D series
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4, Operating Basics.
Recovery discs
Problem Procedure
Cannot access Wireless
LAN
Make sure the computer’s wireless
communication switch is set to on.
If problems persist, consult your LAN
administrator.
Problem Procedure
The following message
appears when
executing Recovery
Disc Creator.
“The Recovery Disc
Creator can not be
launched because
there is no recovery
partition.”
You will see this message if you have previously
chosen to remove the partition and are trying to
create “Recovery Media”. When there is no
recovery partition, the Recovery Disc Creator
cannot make Recovery Media.
However, if you have already created a
“Recovery Media”, you can use it to restore the
recovery partition.
Simply follow the instructions in “Restoring the
preinstall software from your creating Recovery
Media” section in this manual. You will be
directed to select “Restore Original Factory
Image” from the drop-down menu. If you have not
created “Recovery Media”, please contact
TOSHIBA support for assistance.