Filter
Top Products
4-4 User’s Manual
L300/L300D series
4. Press gently at the center of the CD/DVD/HD DVD until you feel it
click into place. The CD/DVD/HD DVD should lie below the top of the
spindle, flush with the spindle base.
5. Push the center of the drawer to close it. Press gently until it locks into
place.
Figure 4-6 Closing the drawer
When the drawer is fully opened, the edge of the computer will extend
slightly over the CD/DVD/HD DVD tray. Therefore, you will need to turn the
CD/DVD/HD DVD at an angle when you place it in the tray. After seating
the CD/DVD/HD DVD, however, make sure it lies flat, as shown in above
figure.
■ Do not touch the laser lens. Doing so could cause misalignment.
■ Do not keep foreign matter from entering the drive. Check the back
edge of the tray to make sure it carries no debris before closing the
drive.
If the CD/DVD/HD DVD is not seated properly when the drawer is closed,
the CD/DVD/HD DVD might be damaged. Also, the drawer might not open
fully when you press the eject button.