Filter
Top Products
22
Connecting the power cord
1
Insert the power cord connector into
the AC IN socket of the projector.
2
Insert the power cord plug into a wall
or other power outlet.
Removing the lens cover
Turning the power on and off
Be sure to remove the lens cover when the power is
turned on. If the cover is left on the projector, it could
become deformed due to heat.
Power cord connector
(Supplied)
Turning the power on
1
Press the ON/STANDBY
button.
The power is turned on, and the ON/
STANDBY indicator lights blue. After a
moment, the start-up screen appears.
zoom
Remote
Control
Control panel Start-up screen
CAUTION
Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your
eyesight.
Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
Do not place your hands, face, or other objects near the air exhaust, the lamp cover or the bottom of the
unit. Doing so could result in injury and/or damage the object.
Notes
The start-up screen will disappear after a moment. You can also configure the system
to prevent the start-up screen from appearing. To do this, use the Default setting
menu.
p.33
The first time you use the projector after purchase, after the start-up screen disap-
pears, the start menu is displayed.
p.24
Do not touch the lens directly with your hand. If fingerprints or stains are left on the
projection lens surface, they may interfere with the projector’s ability to project images
on the screen.