Filter
Top Products
4 Replacement Procedures 4.8 Top Cover
Installing the Top cover
Install the top cover with the display assembly according to the following procedures and
Figures 4-21, 4-22.
1. Connect the lid switch flat cables to CN23 on the system board.
2. Place the top cover, adjusting its position.
CAUTION: Use care to avoid that the MIC cable for MIC is caught between the top
cover and base body.
3. Connect the LED board flat cable to CN17 on the system board.
4. Turn the computer upside down and fix it with the following 25 screws:
- Two M2.5x14 black bind screws
- Twelve M2.5x6 black bind screws
- Eleven M2.5x3 black flat-head screws
4-34 Satellite A60/ Pro A60 Maintenance Manual