Filter
Top Products
3 Tests and Diagnostics 3.31 SETUP
QOSMIO F10 Maintenance Manual (960-498) 3-99
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected Selects an external monitor if one is connected. Otherwise it
selects the internal LCD. (Default)
LCD+AnalogRGB Selects both the internal LCD and the external monitor for
simultaneous display.
NOTE: When starting the computer in Standby or hibernation mode, the last
configuration is remembered. If data does not appear on the display you are using
after starting in Standby or hibernation mode, pressing Fn+F5.
Pressing Fn+F5 changes the display setting as follows in order: the internal
LCD, the external monitor, both the internal LCD and the external monitor and
TV display.
You cannot select TV display in HW Setup. To display on a TV screen, use
Fn+F5.
When an external monitor, which does not support SVGA mode is connected and
“LCD+AnalogRGB” is selected, the external display is not displayed.
(b) LCD Display Stretch
When LCD Display Stretch is enabled, it is possible to stretch the picture in small
resolution mode.
Enabled Enables the LCD display stretch feature. (Default)
Disabled Disables the LCD display stretch feature.
(c) TV Type
This option allows you to select the type of TV.
NTSC (Japan) TV in Japanese system
NTSC (US) TV in the U.S. system
PAL (S-Video) TV in Europe and China system
525p (480p,D2) High Definition Television with 480 progressive scan
750p (720p,D4) High Definition Television with 720 progressive scan
1125i (1080i,D3) High Definition Television with 1080 interlace
525i (480i,D1) High Definition Television with 480 interlace
PAL (SCART) TV in Europe system