Filter
Top Products
4 Replacement Procedures 4.25 Hinge
QOSMIO F10 Maintenance Manual (960-498) 4-69
Installing the Hinge
The following describes the procedure for installing the hinge (See Figure 4-47 to 4-49).
1. Install the hinges (middle frame side) on the back side of the middle frame and
secure them with the following screws.
? M2.5?4B FLAT BIND screw x2
2. Install the hinges (display cover side) and secure them with the following screws
after applying the locktight.
NOTE: Be sure to apply the locktight to the screws specified in the figure.
? M2.5?6B FLAT BIND screw x2
(Locktight)
3. Install the display cover and secure it with the following screws.
? M2.5?6 PSP TIGHT screw x4