Filter
Top Products
4 Replacement Procedures 4.18 Speaker/VGA fan
QOSMIO F10 Maintenance Manual (960-498) 4-49
4.18 Speaker/VGA fan
Removing the Speaker/VGA fan
The following describes the procedure for removing the speaker and VGA fan (See Figure 4-
33).
1. Pull out the speaker cable L (red cable) under the insulator and the glass tapes.
2. Remove the speaker L from the guide of base assembly.
3. Remove the speaker R from the guide of base assembly.
4. Remove the following screws securing the VGA EARTH SPRINGs and remove
them.
? M2?3C SUPER THIN HEAD screw x2
5. Remove the following screws securing the VGA fan.
? M2?4B BIND screw x2
6. Remove the VGA fan from the base assembly
Figure 4-33 Removing the speakers
Insulator
Speaker R
Speaker L
Speaker cable L
VGA fan
Rib
Glass tapes
M2.5x4B FLAT BIND
VGA EARTH SPRINGs M2.5x4B FLAT BIND
Rib