Filter
Top Products
4.3 HDD 4 Replacement Procedures
4-12 QOSMIO F10 Maintenance Manual (960-498)
4.3 HDD
Removing the HDD
The following describes the procedure for removing the HDD (See Figure 4-4 and 4-5).
CAUTION: Be careful not to drop or leave screws in the PC.
Take care not to press on the top or bottom of the HDD. Pressure may cause
data loss or damage to the device.
1. Turn the computer upside down.
2. Remove the following screw fixing the HDD slot cover and remove the HDD slot
cover.
? M2.5?10B FLAT BIND screw x1
3. Hold the tab and pull out the HDD assembly from the connector CN1800 on the
system board.
Figure 4-4 Removing the HDD assembly
HDD assembly
HDD slot cover
CN1800
Tab
M2.5x10B FLAT BIND