Filter
Top Products
4.13 RTC battery 4 Replacement Procedures
4-40 QOSMIO F10 Maintenance Manual (960-498)
4.13 RTC battery
Removing the RTC battery
The following describes the procedure for removing the RTC battery (See Figure 4-25).
1. Disconnect the RTC battery harness from the connector CN8490 on the system board.
2. Pull out the RTC battery harness from the guide and remove the RTC battery.
Figure 4-25 Removing the RTC battery
Installing the RTC battery
The following describes the procedure for installing the RTC battery (See Figure 4-25).
1. Install the RTC battery and pass the RTC battery harness through the guide.
2. Connect the RTC battery harness to the connector CN8490 on the system board.
RTC battery
Guide
RTC battery harness
CN8490