Filter
Top Products
Test Program for Field.
4 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual
3.2 Executing the Diagnostic Test
DOS is required to run the Diagnostics Program. To start the programs follow these steps:
1. Create a DOS bootable disk and copy all the files from the Tests and Diagnostics
software to the disk.
2. Insert the boot disk into the computer’s floppy disk drive and turn on the computer.
The following screen displays:
3. To select the Diagnostic Test from the Diagnostics Menu use the arrow keys to set the
highlight bar to 01 and press Enter.
[ DIAGNOSTICS MENU ]
01.DIAGNOSTIC TEST
02.RUNNING TEST
03.DMI INFORMATION
04.LOG UTILITIES
05.SYSTEM CONFIGURATION
06.OPTION
99.EXIT
TOSHIBA Satellite(Pro) P100 Diagnostics
Version v1.00 (C) Copyright QUANTA Corp. 2005-
::Select item
ESC :Escape