Filter
Top Products
Replacement Procedures
Satellite P100 Maintenance Manual (960-Q02) 4-21
4.7 Keyboard
Removing the keyboard
The following describes the procedure for removing the keyboard (See Figure 4-8 to 4-9).
CAUTION: As the keycap may fall out, when handling the keyboard always hold it by
the frame and do not touch the keycap.
1. Turn the computer upside down
2. Open the display.
3. Remove KBD cover. Insert your finger into the slot between the keyboard cover and
the keyboard. Then, lift up the keyboard cover to remove it. Remove six screws
2.5x3.0 securing the keyboard.
4. Insert your finger into the keyboard slot and keyboard. Then lift up the keyboard to
remove it.
5. Disconnect keyboard cable.