Filter
Top Products
Replacement Procedures
4-16 Satellite P100 Maintenance Manual (960-Q02)
4.5 Wireless LAN card
Removing a Wireless LAN card
The following describes the procedure for removing a Wireless LAN card (See Figure 4-5).
1. Remove the following screw of wireless cover securing wireless LAN card cover and
remove it. And remove screw of wireless board
• 2.5.0 x 4.0B BIND screw x2
2. Disconnect the wireless LAN antenna cable from the connectors on a wireless LAN
card.
3. Open the left and right latches holding a wireless LAN card and remove a wireless
LAN card from the connector CN30 on the system board.
Figure 4-5 Removing a wireless LAN card
Wireless LAN card cover with
2 screws
CN30
Wireless LAN card
Wireless LAN antenna
cable
Wireless LAN with 2 screws