Filter
Top Products
Replacement Procedures
4-10 Satellite P100 Maintenance Manual (960-Q02)
4.3 PC card
Removing a PC card
The following describes the procedure for removing a PC card (See Figure 4-2-1).
CAUTION: Insert or remove a PC card in accordance with any instructions in a PC card
manual or the manuals of the computer system you are using.
1. Push the eject button 1. It will pop out PCMCIA Card when you release it. And eject
button 2 for NEW Card Then press the eject button once more to eject a PC card.
2. Grasp one of PC card and remove it.
NOTE: If a PC card is not inserted all the way, the eject button may not pop out. Be sure
to push a PC card firmly and press the eject button again.
Figure 4-2-1 Removing a PC card
Eject Button1
Eject Button2