Filter
Top Products
4 Replacement Procedures 4.2 Battery pack
4.2 Battery pack
Removing the Battery pack
To remove the battery pack, follow the steps below and refer to Figure 4-1 and 4-2.
CAUTION: When handling battery packs, be careful not to short circuit the terminals.
Also do not drop, hit or apply impact, do not scratch, break, twist or bend
the battery pack.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and other external devices from the computer.
3. Turn the computer face down.
4. Release the battery lock. Insert your finger tip in to the slit and take out the battery
pack while sliding the battery latch as shown in the following figure.
NOTE: For environmental reasons, do not throw away a spent battery pack.
Battery pack
Battery latch
Battery lock
Slit
Figure 4-1 Removing the battery pack
4-8 [CONFIDENTIAL] TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)