Filter
Top Products
2.4 System Board Troubleshooting 2 Troubleshooting Procedures
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) [CONFIDENTIAL] 2-39
Table 2-4-2 Debug port (Boot mode) error status (6/9)
D port status Inspection items Details
Task generation for waiting
INIT_PCI completion
Initialization of SVP (model
supporting SVP)
CMOS data initialization (2)
PnP initialization
Setting of setup items
Waiting for the completion of Multi-
box status check
F109
H/W setting based on resource
Task generation for waiting PnP
resource making completion
PC card slot initialization
SIO initialization (for models supporting SIO)
PnP H/W initialization
FIR initialization (for models supporting FIR)
Making of work for automatic configuration
Acquisition of PCI IRQ
Configuration
F10A
PCI automatic configuration
Saving the result of VGA configuration
Task generation for waiting
PCI_CONFIGURATION completion
Printer port setting (for models supporting printer)
HDD initialization sequence start
Initialization of H/W necessary after
PCI configuration
FDD initialization sequence start (for models
supporting printer internal FDD)
Enabling power off
F10B
Output code generation
F10C FIRST_64KB_CHECK
(Check of first 64KB memory)
F10D INIT_INT_VECTOR (Initialization of vectors)
F10E INIT_NDP
(Initialization of NDP)
F10F
INIT_SYSTEM
(Initialization of system)
Storing of CMOS error status to
IRT_ERR_STS_BUF