Filter
Top Products
4.2 Battery pack 4 Replacement Procedures
5. Separate the battery and battery cover while releasing hooks.
Battery cover
Battery
Hook
Figure 4-2 Removing the battery
Installing the Battery pack
To install the battery pack, follow the steps below and refer to Figure 4-1 and 4-2.
CAUTION: The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. For environmental reasons, collect
the spent battery packs. Use only batteries recommended by Toshiba for
replacements.
NOTE: Check the battery’s terminals visually. If they are dirty, wipe them clean with a
dry cloth.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and all other external devices to the computer.
3. Install the battery to the battery cover while engaging the hooks.
4. Insert the battery pack into the battery slot. Make sure the battery pack is installed
securely.
5. Slide the battery lock into the lock position.
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) [CONFIDENTIAL] 4-9