Filter
Top Products
4 Replacement Procedures 4.18 Modem jack
4.18 Modem jack
To remove the modem jack, follow the steps below and refer to Figure 4-27.
1. Open the insulator (A) and (B).
2. Remove the modem jack from the slot.
3. Disconnect the modem jack cable from the connector CN3011 on the system board.
Insulator (B)
Modem jack
Insulator (A)
CN3011
Modem jack cable
Figure 4-27 Removing the modem jack
Installing the modem jack
To install the modem jack, follow the steps below and refer to Figure 4-27.
1. Connect the modem jack cable to the connector CN3011 on the system board.
2. Arrange the modem jack cable in place.
3. Install the modem jack into the slot of the base assembly.
4. Secure the modem jack cable with the insulator (A) and (B) closed.
4-44 [CONFIDENTIAL] TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)