Filter
Top Products
Preparations
12
Connection terminals
Name : Function
(1) COMPUTER terminal : Inputs RGB signals from a computer or other equipments.
(2) Y, P
B/CB, and PR/CR terminals : Input component video signals (Y/PB/PR) from a video device.
(3) SERVICE terminal : Leave this unconnected. Used for repair purposes.
(4) S-VIDEO terminal : Inputs S-Video signals from a video device.
(5) AUDIO terminal : Inputs audio signals from a computer or video device.
(6) VIDEO terminal : Inputs video signals from a video device.
(7) AV IN terminal* : Inputs audio and video signals from a video device. The AV IN terminal
cannot receive S-Video signals.
Note
• Component video signals are abbreviated as Y/PB/PR in this manual. However, the projector supports signals
from a video device whose output signals are represented as Y/C
B/CR as well.
* Although the AV IN terminal is included in illustrations in this manual, the terminal exists only on the TLP-ET1B
and TLP-ET1E. TLP-ET1U is not equipped with the AV IN terminal.
The AV IN terminal automatically identifies the RGB and composite signals.
Check the setting on the connected device as well.
(2)
(3)
(4)
(7)
(5)(6)
(1)