Toshiba TLP-ET1U Projector User Manual


 
33
English
Before Using
Preparations
Operations
Maintenance
Others
Item Description
Video S-video Y/PB/PR AV Computer
Auto setting Adjust items, such as the sampling phase,
depending on the type of input signal. ––––Ye s
Press the OK button.
Phase Adjust with and to minimize flicker. ––Ye s Ye s
Frequency Adjust with and to minimize periodic
patterns and flickering when many vertical ––––Ye s
lines appear on the screen.
H-position Adjust the horizontal position of the picture
screen. ––––Ye s
Move left Move right
V-position
Adjust the vertical position of the picture screen.
Move up Move down
––––Ye s
Clamp 1) Press the OK button.
2) Use
or to select Clamp 1 or 2.
Clamp 1:
Adjust the position of the clamp pulse.
Down Up
––––Ye s
Clamp 2:
Adjust the width of the clamp pulse.
Shorter Longer
Signal format Set the Y/PB/PR signal DTV format.
1) Press the OK button.
2) Select one from the displayed list with
and , then press the OK button.
Auto:
Automatically identifies the type of input signal.
If this fails, select one from the following:
––Ye s ––
480i(525i)@60/480p(525p)@60/
576i(625i)@50/576p(625p)@50/
720p(750p)@60/720p(750p)@50/
1080i(1125i)@60/1152i(1250i)@50/
1035i(1125i)@60/1080i(1125i)@50
Video mode Set the VIDEO and S-VIDEO color system.
1) Press the OK button.
2) Select one from the displayed list with
and , then press the OK button.
Auto:
Ye s Ye s Ye s
Automatically identifies the type of input signal.
If this fails, select one from the following:
NTSC/PAL/SECAM/PAL-N/PAL-M/PAL60/NTSC4.43
Notes
Items can be adjusted/set (marked with Ye s ) or cannot (marked with “–”) depending on each type of input.
Pressing the EXIT button on the remote control dismisses the menu screen.