Filter
Top Products
36
Operations
Notes
• Items can be displayed (marked with “Ye s ”) or cannot (marked with “–”) depending on each type of input.
• Pressing the EXIT button on the remote control dismisses the menu screen.
Item Description
Video S-video Y/PB/PR AV Computer
Input Displays the input source name. Yes Yes Yes Yes Yes
Mode name Displays the RGB signal mode name.
*1
––––Ye s
H-resolution Displays the horizontal resolution (in dots). ––––Ye s
V-resolution Displays the vertical resolution (in dots). ––––Yes
H-frequency Displays the horizontal sync frequency. ––––Ye s
V-frequency Displays the vertical sync frequency.
*2
––––Ye s
Sync Displays the sync signal polarity.
*3
––––Ye s
Signal format Displays the Y/PB/PR signal format. ––Ye s ––
Video mode Displays the video signal color system. Yes Yes – Ye s –
Lamp time Displays the total time of lamp use.
*4
Ye s Ye s Ye s Ye s Ye s
Version Displays the firmware version.
*5
Ye s Ye s Ye s Ye s Ye s
Using the menus (Continued)
Press the MENU button.
Use the and buttons to select
the Status display menu icon [
].
The “Status display” menu will appear.
Status display menu
This menu displays information about the input signal, lamp use time, etc.
e.g.
Remote control
Control panel
Menu
Status display
Exit
Input
Mode name
H-resolution
V-resolution
H-frequency
V-frequency
Sync
Lamp time
Version
*1 : The mode of supported RGB signals ( p.48) is shown.
*2 : Same as the refresh rate of the computer signal.
*3 : Sync signal polarity shown as P (positive) or N (negative) for “H/V”.
*4 : Display “Lamp time” as a measure of when the lamp should be replaced. (Cannot be used as a counter of
guaranteed lamp time.)
*5:“Version” shows the version of the projector’s internal control program. This version is referred for customer
service, etc.