Filter
Top Products
15
Preparations
English
Before Using
Preparations
Operations
Maintenance
Others
Connecting an input source device
Before connection
• Read the owner’s manual of the device to connect to the projector.
• Turn off the power of both devices before connecting.
Connecting a video device
■ Using the AV or S-Video cable
To S-Video output
S-Video cable
(not supplied)
AV cable
(supplied)
Red
To audio output(R)
White
To audio output(L)
Yellow
To video output
VCR
(Red)(White)(Yellow)
Note
•
Use the AV cable or S-Video cable to connect the input device to this unit. When using the S-Video cable, also use an
audio cable such as the AV cable to connect the audio input from the video device to the AUDIO terminals on the unit.
■ Using the SCART cable
VCR
SCART cable*
(not supplied)
To SCART
terminal
* The TLP-ET1U cannot use the SCART cable for connection since it has no AV IN terminal.