Filter
Top Products
CONTENTS
Installation and
connection
17
Place the projector on a steady, level surface such as a table.
To obtain proper screen projected, place the projector so that the projecting light hits the screen squarely.
Floor-mounted projector placement (continued)
Top view
Screen
b(cm)
28 - 1.38 10
32 1.23 1.58 12
36 1.39 1.78 13
42 1.62 2.09 15
60 2.33 3.00 22
80 3.12 4.01 29
100 3.91 5.02 36
150 5.89 7.54 55
200 7.86 10.07 73
250 9.83 - 91
a(m)
a
b
90°
Side view
a: Distance between the lens and
the screen (m)
b: Distance between the lens height
and the bottom of projection area
(cm)
• The values are approximations.
1
2
90°
90°
TEMPLAMPON
BUSY FAN
ON/STANDBY
KEYSTONE
SET
AUTOAUTO
EXIT
ENTER
MENU
INPUT
VOL/ADJ.
Point the lens straight at the center of the screen as above.
Determine the screen size projected on the screen.
The projection size depends on the distance between the lens and the screen.
Adjust the projection size by changing the distances as shown below.
Place the projector horizontally so that the projecting
light hits the screen squarely.
Continued
a (min.) =
Projection size
-
0.8660
25.339
a (max.) =
Projection size
-
0.6766
19.796
b = Projection size - (cm) x 0.143
Projection size
(inches)
Maximum
(At minimum zoom)
Minimum
(At maximum zoom)
Screen
Screen