Toshiba TLP-MT7E Projector User Manual


 
Installation and
connection
22
Connecting video equipment (continued)
Note
The S-VIDEO connector and VIDEO jack can be used independently, but the audio input jacks are used as both the S-VIDEO and VIDEO input.
You can project the picture from video equipment by using VIDEO IN connectors.
Check that the power for the projector and video equipment is off before connecting the cables.
C
O
M
P
U
T
E
R
IN
1
(
Y
/P
B
/P
R
)
C
O
N
T
R
O
L
S-VIDEO
VIDEO
V
I
D
E
O
I
N
R
-
A
U
D
I
O
-
L
AUDIO
IN
COMPONENT IN
(
COMPUTER
)
CONTROL
S-VIDEOVIDEO
VIDEO IN
R - AUDIO - L
AUDIO
IN
S-VIDEO connector
At shipping from factory, the projector is set so that this
connector cannot be selected by the INPUT button.
Change the setting on the menu screen when using.
41
To S-VIDEO connector
Be sure to connect in the
proper direction.
To S-video output
S-video cable
(Not supplied)
(Red) To AUDIO-R jack
(White) To AUDIO-L jack
(Yellow) To VIDEO jack
AV cable (Supplied)
Pin plug (yellow)
To video output
Pin plug (white)
To audio output (L)
Pin plug (red)
To audio output (R)
Video equipment