Filter
Top Products
71
Others
71
Symptom
The color is faint.
The tint is not good.
The remote control does not
work.
Cause
• The “Color”, “Tint”, “R-Level”, “G-Level” or “B-Level” adjustments
are not correct.
• The lamp life is ending.
• The remote control is not facing the remote sensor.
• The remote control is too far.
• There is an obstruction between the remote control and the
remote sensor.
• The batteries are exhausted.
Correction
Make the “Picture” adjustments.
Replace the lamp.
Face the remote control transmitter toward the remote
sensor on the projector.
Operate within about 5 meters.
Remove the obstacle.
Replace the batteries.
Page
44
68
15
15
–
Before calling service personal (continued)
14