Toshiba TLP-MT7E Projector User Manual


 
CONTENTS
Installation and
connection
23
Notes
The projector cannot be connected to a computer without an analog RGB connector. For details, refer to the computer manual.
You may not be able to connect some computers to the projector. For details, consult the dealer.
Some computers may have output modes which are not compatible with this projector. Check the compatibility of the connectors, signal levels, timing,
resolutions, etc.
Connecting a computer
You can project the picture from the computer.
Check that the power for the projector and computer is off before connecting the cables.
COMPONENT IN
(
COMPUTER
)
CONTROL
S-VIDEOVIDEO
VIDEO IN
R - AUDIO - L
AUDIO
IN
C
O
M
P
O
N
E
N
T IN
(
C
O
M
P
U
TE
R
)
C
O
N
TR
O
L
S-VIDEO
VIDEO
V
I
D
E
O
I
N
R
- A
U
D
IO
- L
AUDI O
IN
COMPONENT IN Connector
For use as both Y/PB/PR input and computer input. At shipping from
factory, it is set for use as Y/PB/PR input. Change the setting on the
menu screen when using as computer input.
41
AUDIO IN jack
For use as both audio signals for Y/PB/PR input and computer input.
To COMPONENT IN Connector
Be sure to connect in the proper direction.
Monitor cable
(Not supplied)
AUDIO IN jack
Audio cable (Not supplied)
To monitor port
ø 3.5mm Stereo mini-jack
To audio output port
Computer