Filter
Top Products
10
Setting up the Projector
F
IGURE
7
Connecting the projector to a video player using an S-video cable and the audio
cable and adapter
NOTE
: The audio adapter is
provided so that the same audio
cable used to connect a
computer can be used with the
adapter to connect a VCR.
4
Plug the audio adapter’s white connector into the left “audio out”
connector on your video player. Plug the adapter’s red connector
into the right “audio out” connector on the video player (Figure 6
and Figure 7).
5
Plug the audio adapter’s other end into the audio cable.
6
Plug the audio cable into the “audio in” connector on the projec-
tor.
The projector is compatible with these major broadcast video standards:
NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, and SECAM. It automati-
cally adjusts to optimize its performance for the incoming video. See
“Video Standard” on page 23 for details.
CAUTION:
Your video player
may also have a “Video Out”
connector for a coaxial cable
connection. DO NOT use this to
connect to the projector.
audio cable
S-video
audio
adapter
cable