Filter
Top Products
16
Using the Projector
Using the Keypad and Remote Buttons
While the menus are displayed, the volume, source, and standby buttons
on the keypad act as menu navigation buttons. See “Using the On-
Screen Menus” on page 18 for details.
F
IGURE
11
Keypad and remote buttons
Lamp on/off (keypad only)
Press the
lamp on/off
button to turn the lamp on or off. The Lamp LED
indicates the state of the lamp. A green Lamp LED indicates that you
can turn the lamp on, or the lamp is currently on. An orange LED indi-
cates the software is initializing or the lamp is cooling. Do not press the
lamp on/off
button when the LED is orange.
Menu
Press the
menu
button to open the on-screen menus. Press
menu
again to
close the menus. When you close the menus, the projector saves any
changes you made. For more information about the on-screen menus,
see page 18.
Source (keypad only) or Computer and Video (remote only)
When you have more than one source (computer and video) connected
to the projector, select between them by pressing the
source
button on
the keypad or the
computer
or
video
button on the remote.
lamp LED