Filter
Top Products
17
Standby
When you press
standby
, the display and audio turn off and a blank
screen is displayed for 15 minutes. You can change the amount of time
the projector stays in standby mode; see “Standby Time” on page 23 for
details.
•
If you press
standby
again within 15 minutes, the projector returns to
normal operations immediately.
•
If you press
standby
again after 15 minutes, there is about a 60 second
delay before the lamp turns back on.
•
If you don’t press
standby
again, the lamp turns off after 15 minutes.
Volume (keypad only)
To increase the volume, press
volume + .
To decrease the volume,
press
volume -
.
Volume adjustments are saved for each source you have connected.