4-8 User’s Manual
Satellite U500/U500D, Satellite Pro U500/U500D
Fingerprint Single Sign-On feature
General
This is a feature that allows the user to complete the authentication for both
the User Password (and optionally, the HDD user and Supervisor
passwords) and logging on to Windows using only one fingerprint
authentication when booting up. It is necessary to register the User
Password and Windows Logon password before using the fingerprint
Pre- OS feature and this fingerprint Single Sign-On feature. Please use
TOSHIBA HW Setup to register your User Password.
Only one fingerprint authentication is required to replace the User
Password (and, if selected, the HDD user and Supervisor passwords) and
Windows Logon password.
How to enable fingerprint system boot authentication settings and
Single Sign-on feature
It is necessary to first enroll your fingerprint with the TOSHIBA Fingerprint
Utility and Single Sign-on feature prior to enabling and configuring the
fingerprint Pre-OS feature.
Check that your fingerprint is enrolled before configuring the settings.
1. Logon as Administrator means a user has administrator privileges.
2. Click Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA
Fingerprint Utility.
3. Swipe your finger across the fingerprint sensor.
4. Click Run As Administrator. If UAC setting for windows is off, this
button won’t appear.
5. User Account Control window is displayed when you click a Run as
administrator. Select Allow on User Account Control window.
6. Swipe your finger across the fingerprint sensor.
7. Click Setting.
8. Place a check mark in Boot authentication if you want to use the
Single Sign-on feature, also check on Single Sign-on.
9. Click “Apply”.
10. “Save succeeded” is displayed. Click “OK”.
11. Click Close.
12. “Are you sure to close this window?” is displayed. Click “OK”.
13. Click Close.
14. “Are you sure to close this window?” is displayed. Click “OK”.
The modified configuration for fingerprint Pre-OS feature becomes effective
the next time the system is booted up.