Filter
Top Products
55
Getting Started
Removing a memory module
3 Gently lift the memory module to a 30-degree angle and
slide it out of the slot.
(Sample Illustration) Removing the memory module
4 Replace the memory module slot cover and secure it
using the screw(s).
5 Re-insert the battery. For more information on inserting
the battery, see “Inserting a charged battery” on
page 101.
6 Turn the computer right side up. Make sure to remove
the soft cloth from the work surface before restarting the
computer.
Always make sure your computer and AC adaptor have
adequate ventilation and are protected from overheating
when the power is turned on or when an AC adaptor is
connected to a power outlet (even if your computer is in
Sleep mode). In this condition, observe the following:
Never cover your computer or AC adaptor with any object.
Never place your computer or AC adaptor near a heat
source, such as an electric blanket or heater.
Never cover or block the air vents including those located
at the underside of the computer.
Always operate your computer on a hard flat surface.
Using your computer on a carpet or other soft material
can block the vents located at the underside of the
computer.
Overheating your computer or AC adaptor could cause
system failure, computer or AC adaptor damage or a fire,
possibly resulting in serious injury.
Back of computer
Slot B
Slot A