Filter
Top Products
37
5.6.1 Settings
Figure 5-33 Enable Rogue AP Detection
Rogue AP Detection: Check the box to enable Rogue AP Detection, then click Save.
5.6.2 Detected Rogue AP List
Information about the detected rogue APs is displayed in the list. By default, the status of the
detected rogue AP is unknown. You can click Known in Action column to move the AP to the
Trusted AP List.
Figure 5-34 Detected Rogue AP List
Click to scan rogue APs. Make sure you have enabled Rogue AP Detection and
saved the setting before you click the button.
Action: Click Known to move the AP to the Trusted AP List. After the configurations are
saved, the moved AP will not be displayed in the Detected Rogue AP List.
MAC:
The MAC address of the rogue AP.
SSID:
The SSID for the rogue AP.
Band:
Displays the frequency band which the wireless network of the rogue AP operates
at.
Channel:
The channel on which the rogue AP is currently broadcasting.
Security:
Displays the enabling or disabling of the security mode of the wireless network.