Filter
Top Products
51
SMTP Server:
Enter the IP address of the SMTP server.
Enable
Authentication:
Generally
users are required to log in to the SMTP server by entering user
name and password.
User Name: Enter the sender’s email address.
Password: Enter the password of the sender’s email address.
Confirm Password: Enter the password again for confirmation.
Time Mode:
System logs can be sent at specific time or time interval.
Fixation Time: Set a fixed time, for example, 15:00. The recipient will
receive the system logs sent by the device at 15:00 every day.
Period Time: Set a time interval, for example, 5 hours. The recipient will
receive the system logs sent by the device every 5 hours.
Enable Server
System logs can also be sent to a server. After Auto Mail Feature is enabled, the following content
will be shown.
Figure 7-5 Enable Server
System Log Server IP:
Enter the IP address of the remote server.
System Log Server Port:
Enter the port of the remote server.
Enable Nvram
By default, Nvram is disabled. Check the box to enable Nvram, system logs will be saved after
power supply is cut.
7.2 Web Server
You can log in web management interface, thereby manage and maintain the device.