TP-Link TD-W8968 Modem User Manual


 
TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
6
¾ ON/OFF: The switch for the power.
¾ WPS: The switch for the WPS function. For details, please refer to 4.8.3 WPS Settings
.
¾ RESET: There are two ways to reset the Router's factory defaults.
Method one: With the Router powered on, use a pin to press and hold the Reset button for at
least 5 seconds. And the Router will reboot to its factory default settings.
Method two: Restore the default setting from “Maintenance-SysRestart” of the Router's
Web-based Utility.
¾ WiFi: The switch for the WiFi function.
¾ USB: The USB port connects to a USB storage device or a USB printer.
¾ LAN1, LAN2, LAN3, LAN4/WAN: Through these ports, you can connect the Router to your
PC or the other Ethernet network devices. Enable EWAN function and you will be able to
connect to Cable/FTTH/VDSL/ADSL device.
¾ ADSL: Through the port, you can connect the router with the telephone. Or you can connect
them by an external separate splitter. For details, please refer to 2.3 Connecting the Modem
Router.
¾ Antennas: Used for wireless operation and data transmit.