TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
35
Click the Save button to save the settings.
4.5.5 MAC Clone
Choose menu “Network”Æ“MAC Clone”, you can configure the MAC address of the WAN
Interface as shown below.
The WAN Interface List displays the Lay2 Interfaces you have configured on the section 4.5.1
WAN Settings and its default MAC Address. You can select corresponding WAN Interface from the
drop-down list and click Clone MAC To button to clone your current PC MAC, and then click
Save.
Figure 4-18
)
Note:
Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not
be the same with each other.
4.5.6 ALG Settings
Choose menu “Network”Æ“ALG Settings”, and then you can configure the basic security in the
screen as shown in Figure 4-19.
Figure 4-19
¾ Virtual Private Network (VPN): VPN Passthrough must be enabled if you want to allow VPN
tunnels using VPN protocols to pass through the modem router.
