Filter
Top Products
147
policy to port 2:
TL-SG3424(config)# access-list policy action policy1 120
TL-SG3424(config-action)# redirect interface gigabitEthernet 1/0/2
redirect vlan
Description
The redirect vlan command is used to configure Direction function of policy
action for specified VLAN.
Syntax
redirect vlan vlan-id
Parameter
vlan-id —— The VLAN ID of Redirect. The data packets matching the corresponding
ACL will be forwarded in the specific VLAN. The VLAN ID ranges from 1 to
4094.
Command Mode
Action Configuration Mode
Example
Edit the actions for policy1. Forward the data packets matching ACL 120 in the
policy to Fast Ethernet VLAN 1:
TL-SG3424(config)# access-list policy action policy1 120
TL-SG3424(config-action)# redirect vlan 1
s-condition
Description
The s-condition command is used to configure Stream Condition function of
policy action.
Syntax
s-condition rate rate osd { none | discard }
Parameter
rate —— The rate of Stream Condition, ranging from 0 to 100000kbps.
osd —— Out of Band disposal of Stream Condition. It is the disposal way of the
data packets those are transmitted beyond the rate. There are two options,
none and discard. By default, the option is none.